#Fortivoice speeddial password

Typically, you will use the default mailbox.

Set Main voice mailbox to the extension's own voice mailbox or that of another extension as the voice mailbox of this extension.

In the User Setting section, under the Management tab, click Voicemail.

These are used by the extension user to access their voicemail and the FortiVoice user portal, and to make restricted calls, respectively.

Under the Phone Access tab, enter or Generate a Voicemail PIN and Personal code.

#Fortivoice speeddial password

If this is the case, click Password policy is disabled to enable Password/PINВ Policy, and configure the minimum requirements for passwords as appropriate. A warning may appear indicating that the system password policy is disabled.

Under the Web Access tab, set Authentication type to Local and enter or Generate a User password.

See Configuring voicemail for information on configuring the Voicemail settings.

In the User Setting section, under the Management tab, assign a User privilege, the Department the extension belongs to, and a Survival branch profile.

Optionally, enable message waiting indication ( MWI), Auto answer, and Direct call.

Select External if the extension does require NAT. Note that IPВ extensions that are designated as Internal are those extensions that do not traverse through NAT to connect to the FortiVoice unit.

Enter or Generate a SIPВ password, and set Location to Internal.

Then click Advanced to open the desktop phone advanced settings.

Assign an appropriate SIPВ profile from the SIP settings drop-down, and assign an Emergency zone.

For Device, click New, where you can enter the extension's device MACВ address, Phone model, and assign a Phone profile.

For this example, stay on the Desktop Phone tab, and set the Type to FortiFone from the drop-down menu.

In the Device Setting section, you can determine whether the IP extension is assigned as either a Desktop Phone, Soft Phone, or an Auxiliary Device.

This is the name that appears on the phone screen when receiving a call from this extension.

A green check mark will appear to indicate that the number entered is Available.ДЇortiVoice auto-populates the User ID field. Go to Extension >В Extension >В IPВ Extension and click New (or select and Edit an existing extension).Installing and configuring the FortiFone softclient for mobile LDAP authentication configuration for extension usersДЄpplying the LDAP profile to an extensionД¬hanging the default external access portsДЇortiFone softclient for mobile вЂ“ best practicesД¬onfiguring FortiFone softclient settings on FortiVoiceД¬onfiguring FortiGate for SIP over TCP or UDP Uploading the FortiFone firmware to FortiVoiceД¬onfiguring an outbound dialplan for emergency calls Installing licenses on a FortiVoice HA groupД®nabling high availability activity logging Synchronizing configuration and data in a FortiVoice HA group Setting up and starting an auto dialer campaignД¬onfiguring call parking on programmable phone keysДЄuto provisioning for FortiFone devices on different subnetsД¬onfiguring HTTP or HTTPS protocol supportД¬aller ID modification hierarchy for normal callsД¬aller ID modification hierarchy for emergency callsДЇortiVoice Click-to-dial configuration on Google ChromeД¬onfiguring notification options for receiving a fax or voicemail, and missing a phone callД¬onfiguring high availability on FortiVoice units